Adapter For Danfoss - eQ-3 homematic IP HmIP-eTRV-2 Montage- Und Bedienungsanleitung

45) or the supplied support ring (see „5.2.3 Support
ring" on page 49).
5.2.2

Adapter for Danfoss

One of the provided adapters is needed to attach to Dan-
foss valves. The assignment of the suitable adapter to the
relevant valve can be found in the following illustrations.
Please ensure that you do not trap your fingers
between the two halves of the adapter!
The RA and RAV adapters have been manufactured with
pre-tension in order to provide a better seat. Use a screw-
driver during installation if necessary, and bend it open
slightly in the vicinity of the screw (see following figures).
Start-up
45