Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2.3
Support ring
The valves from different manufacturers may have toler-
ance fluctuations that make the radiator thermostat more
loosely seated on the valve. In this case, the provided
support ring (R) should be placed into the flange before
mounting the radiator thermostat (see figure 5).
5.3
Adaption run
Once the batteries have been inserted, the motor
reserves. Meanwhile, "
symbol (
After the radiator thermostat has been mounted success-
fully, an adaption run (
order to adapt the device to the valve. To do this, proceed
as follows:
•
As soon as "
trol wheel/boost button (E) to start the adaption run.
If the display backlight is off, you must press but-
ton (E) a second time to start the adaption run.
Now the actuator performs an adaption run. "
the activity symbol (
no operation is possible. After the adapting run has been
successful, the display returns back to normal.
) are displayed.
" is displayed, press the con-
) are displayed. During this time,
" and the activity
) has to be performed in
Start-up
" and
49
Werbung
Inhaltsverzeichnis
Fehlerbehebung
