Automatic Operation; Setting The Alarm - Klugmann KO1676TCPI Bedienungsanleitung

Automatic operation

After the duration setting is completed, click the knob to set the end time , the icon
the knob is set, after the setting is completed, press the knob to enter the next item and confirm
the previous item or click the key
After the oven is set to the fully automatic mode, the clock display interface will display the end time
of the oven. After the appointment time is over, the oven starts to work (the working method is the
same as semi-automatic operation).
For example: Now the clock is set to 12:00 and the duration is set to 30 minutes, After the end time is
14:00, then the automatic mode is turned on, the clock display interface displays 14:00 and the time
button is always bright, and when the clock is 13:30 minutes, The oven begins.
Caution！
End of cooking time range: current time<end of cooking time<current time+24hours.
End of cooking time= current time+cooking time+waiting time .
The reservation is waiting in the stage the furnace light is not bright, the wait time ends to enter the
duration stage of the furnace light to light a minute (same normally).
Temperature and time regulation
When the oven working program is selected, before starting to run, if you want to change the
operating temperature and operating time, you can press the key
through the settings ).
1.After selecting the cooking function, the default temperature value is displayed, point the
temperature button, the temperature display module flashes , and the rotary coding switch can set
the temperature. After the setting is completed, click the coding switch or click the start button to
directly start the confirmation.
2.Touch time key sequentially to switche duration and end time, the display module displays the
default time and flash, and the rotation coding switch can set the length of time. After the setting is
complete, press the "
3.When you want to change the working time or the operating temperature during the
operation, you must first press the "
according to the above steps, the setting is completed, and the "Start Pause" button can be
confirmed to operate, the oven is set according to the new setting parameters.

Setting the alarm

1.Select the alarm setting by pressing the
set a good time point to confirm that the icon
begins to count down.
2.When the alarm time is up,and the buzzer will sound for 90 seconds to remind the user . To
silence the sound, press any key or it will automatically stop beeping after 90 seconds, and the
alarm clock icon will go out.
3.After the alarm function is activated, if you want to cancel the alarm, you can cancel the alarm
function by setting the alarm time to "0:00".
to confirm
" button, the oven works in accordance with the new setting parameters.
" button at which point the time and temperature can be set
button, The switch can make an alarm time setting,
stops flashing into a normal bright, the alarm
flashes,
and (Click the knob to cycle