Operation - Klugmann KO610.1TCX Bedienungsanleitung

OPERATION

Melody knob "2" to change the minute value. At this time, the "minutes", "hours" and "seconds flashing
icon" are always on.
If the knob "2" is not loosened, the "minute position" will increase or decrease rapidly, changing 4 times
per second. After stopping the rotation for 3 seconds, the "minute digit" continues to flash.
3. Touch the button "3", the clock setting ends." "is always on, displaying the set
value,The" "icon is off, the second flashing icon" "flashes, and the clock starts to count up.
Note:
● The clock is a 24-hour system. After the first power-on, if the clock is not set, the clock will start
timing at 12:00.
● During the clock setting process, you can touch the "6" button to cancel the current clock
setting and return to the display of "12:00" or the current clock display.
● If you need to modify the clock, follow the clock setting steps.
● Turning the knob "2" will not loosen, the buzzer will not beep; short touch the button will beep
once for 0.2s.
● Hour setting range: 00---23; minute setting range: 00---59.
● The clock cannot be changed in the alarm clock, reservation function, and barbecue working
state.
Function setting
In the standby mode, turn the knob "1" to enter the function selection mode, and the function diagram of
the corresponding display is always bright." "shows the current clock,and shows the
default temperature.
Note:
● Rotate the knob "1" to the right, the order of function adjustment:
, Rotate to the left, and vice versa.
● The default temperature of each gear, see "Attached Table 1"
● If there is no confirmation in the function settings (including the temperature setting of the
function, cooking time setting, end time setting, and reservation setting), turn the knob "1"
without loosening, and the original set time and temperature are invalid.
● Rotate the knob "1" without loosening, and the function can be adjusted quickly, and 4
switches can be quickly changed in sequence every second.
12