Klugmann KO1676TCPI Bedienungsanleitung Seite 52

In order to gain easier access to the oven
cavity for cleaning and maintenance purposes,
the door can be removed.
To remove the door, first tilt the safety catch
part of the hinge upwards. Gently close the
door approximately halfway, lift the door and
pull it out towards you.
Follow these steps in reverse to replace the
door.
When replacing the door, ensure that
the notch of the hinge (see illustration)
inserts into the hinge slot in the cavity
frame. Once the door has been re-fitted,
remember to lower down the safety catch.
Failure to do this may damage the hinge
when closing the door.
Tilting the hinge safety catches
Door removal
Inner glass panel removal
Remove both door top corner pieces.
These can be removed by pressing in
the arrow-marked tabs on either side
of the door and sliding the corner pieces
out.
Lift the edge of the inner glass slightly
and then slide it from its lower clips. The
middle glass panel can then also be
removed. Follow these steps in reverse
to replace the glass.
Removal of the internal glass panel