Troubleshooting - Klugmann KO1676TCPI Bedienungsanleitung

TROUBLESHOOTING

When a fault, conflict or other fault occurs, some error codes are displayed in the time
display area.The meanings are as follows:
DISPLAY
No temperature sensor/open
E01
circuit
The display panel is incorrect
E02 with the power board
communication.
Temperature sensor short
E04
circuit
E06 Long key press error
Important: All repairs must be carried out by qualified personnel.
ERROR POSSIBLE CAUSE(S)
The control board detects that there is no
temperature sensor, the oven will stop
heating .
The temperature is below -10°C .
Communication lines have problems or
connecting contact failures.
A short circuit of the sensor is detected
and the oven stops heating .
After the button is pressed for more than
15 seconds, a buzzersignal will be
generated, and theerror code will be
displayed on the digital tube at the same
time .