Installing The Oven; Operation - Klugmann KO1676TCPI Bedienungsanleitung

Installing the oven

The kitchen should be dry and have effective ventilation according to the existing
technical previsions.
Main lead behind the oven must be placed in such manner to avoid touching the back
panel of the oven because of the heat it develops during operation.
Remove any packaging materials(foils,artificial foam,nails,etc.)from the reach of children,
because they represent potential danger.Children may swallow small parts,or suffocate
with foils.
This is a built-in oven,whichmeans that its back wall and one side wallcan be placed
next to a high piece of furniture or a wall.Coating or veneer used on fitted furniture must
be applied with a heat resistant adhesive(100 ),This prevents surface deformation or
detachment of the coating.If you are unsure of your furniture's heat resistance,you
should leave approximately 2cm of free space around the oven.The wall behind the oven
should be resistant to high temperatures.During operation,its back side can warm up to
around 50 above the ambient temperature.
Make an opening with the dimensions given in the diageam for the oven to be fitted.
The appliance must be earthed.
Insert the oven completely into the opening without allowing the four screws in the
places shown in the diagram to fall out.
595
595
554
570
547
20