How To Operate The Oven; Automatic Operation - Klugmann KO1076TFX Bedienungsanleitung

How to operate the oven

1.When the power is turned on for the first time, it enters the standby state, the display is completely
1s, buzzer prompt, time display the default time 12:00 and flash.
2. " / " to setting time, after the setting is completed, click the "
confirm after 5 seconds.
3.In standby mode, hold the button
selected by default, display the default temperature and time.
4.When the oven function is selected, after setting the working temperature and related working time,
press the key " "once, and the oven will start to run.
Caution!
1.After the clock is confirmed, it cannot be changed in standby state. After the function is selected,
hold the button to hear a beep, the clock blinks, and set the keys
2.Return to standby for 10 minutes without operation under power-on state.
Semi-automatic operation
1.the oven is set to the semi-automatic mode, press the key
with 100% brightness), the time display module displays the default time (0:00) and flashes , enters
the duration setting state,
2.When the oven begins to run, the working time enters the countdown mode, the timing is a
decrement count.
3.When the countdown is 0, the time, temperature and time display area are in flashing state, and
the buzzer beeps continuously for 120s, the sound signal can be pressed by any Button to cancel
or automatically stop after 120 seconds . When the buzzer stops beeping, the display interface
shows the pause state.
Caution!
1.After the duration function is activated, if you want to cancel the continuous working time, you can
cancel the function by setting the time to "0:00". (After canceling the duration, it will run according to
the maximum working time).
2.Return to standby after 10 minutes of no operation after cooking.

Automatic operation

1.After setting the semi-automatic mode, press the button
the current time and blink. The keys
2.After the oven is set to automatic mode, the clock display interface displays the set end time, and
the button 100% brightness is always on. when the appointment time is over, the oven starts to
work, the button is off, and the button
the same as the semi-automatic operation).
For example: now the clock 12:00 set duration is set to 30 minutes, and the end time is 14:00, after
the automatic mode is turned on, the clock display interface displays 14:00 and the button
always on, when the clock is 13:30 minutes After that, the oven started to work.
for 2 seconds to turn on, After boot, the first function is
/ key can adjust the length of time，Press the button
/ can adjust the time length.
100% brightness is always on .(the working method is
" to confirm or automatically
/ .
(the button indicator is always on
. The time display module will display
to setting.
is