Personnel Qualification; Target Group - Optimum OPTigrind GU 30 Betriebsanleitung

Always disconnect the grinding machine from the electrical power supply before performing
cleaning or maintenance tasks.
WARNING!
The grinding machine may only be used with fully functional safety devices.
Disconnect the grinding machine immediately, whenever you detect a failure in the
safety devices or when they are not fitted!
All additional devices installed by the operator must be equipped with the stipulated
safety devices.
This is your responsibility as the operator!

Safety devices on page 25
1.5

Personnel qualification

1.5.1

Target group

This manual is addressed to

the operating companies,

the operators,

the maintenance personnel.
Consequently, the warning notes refer both to the use of the grinding machine and to its main-
tenance.
Always disconnect the grinding machine from the electrical power supply. This will prevent it
from being used by unauthorized persons.
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,
GB GU30
24 Translation of original instruction
Safety
Version 1.0.2 - 2021-3-9