First Commissioning - Optimum OPTigrind GU 30 Betriebsanleitung

3.5 Dimensions
Img.3-1: GU 30
3.6

First commissioning

ATTENTION!
Before commissioning the machine, all bolts, fastenings and protections must be
checked and retightened as necessary!
WARNING!
Danger due to the use of unsuitable grinding wheels. Only use grinding wheels that
withstand the speed requirements and occurring loads.
WARNING!
First commissioned of the grinding machine by inexperienced personnel constitute a
risk to personnel and equipment.
We do not accept any liability for damages caused by incorrectly performed commissioning.

Personnel qualification on page 24
For first commissioning, the grinding wheels must be trued with a dressing stone to ensure the
true running of the grinding wheels.
Grinding wheels made from compound abrasives have a natural imbalance as a result of the
pressing process during the manufacturing process. Compound grinding wheels have a higher
or lower density in some areas. This natural imbalance cannot be removed with a dressing
GB GU30
30 Translation of original instruction
Delivery, interdepartmental transport and unpacking
Version 1.0.2 - 2021-3-9