Accessories; Floor Nozzle - Cleanmaxx ND8803-1 Bedienungsanleitung

WARNING – Danger of Injury
■
Keep the packaging material away
from children and animals. There is a
danger of suffocation.
■
Make sure that the connecting cable
is always kept out of the reach of
small children and animals. There is a
danger of strangulation.
■
Lay the connecting cable in such a
way that it does not present a trip
hazard.
■
Keep animals, hair, jewellery, wide
clothing, fi ngers and all other body
parts away from the nozzles of the
device.
WARNING – Danger of Fire!
■
Do not cover the device during
operation in order to prevent it from
catching fi re. Do not insert anything
into the openings of the device and
make sure that they do not become
clogged.
NOTICE – Risk of Damage to Materi-
al and Property
■
Only connect the device to a plug
socket that is properly installed and
matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
■
Only use suitable extension cables
whose technical data is the same as
that of the device.
■
Make sure that the connecting cable
is not squashed, bent or laid over
sharp edges and does not come into
contact with hot surfaces.
■
The device must be switched off when
inserting or removing the mains plug.
03040_Inlay_de-en-fr-nl_A5_V1.indb 13 03040_Inlay_de-en-fr-nl_A5_V1.indb 13
■
Pull the mains plug out of the plug
socket if an error occurs during opera-
tion or before a thunderstorm.
■
Always pull the mains plug and never
the mains cable to disconnect the
device from the mains power. Never
pull or carry the device by the mains
cable.
■
Protect the device from heat, fl ames,
sub-zero temperatures, persistent
moisture and impacts.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Do not place heavy objects on the
device or the connecting cable.

ACCESSORIES

Floor Nozzle

The fl oor nozzle (1) is suitable for both
carpets and hard fl oors.
The foot switch allows you to change
between carpet and hard fl oor (Picture D).
For hard fl oors, a brush is extended on
the underside of the nozzle.
Combi Nozzle
The combi nozzle (2) is a combination of
a crevice and brush nozzle. Flip up the
end piece in the direction of the arrow to
turn the crevice nozzle into a brush nozzle
(Picture E).
The crevice nozzle is suitable for uphol-
stery and for all nooks and crannies that
cannot be reached with other nozzles.
The brush nozzle is intended for all une-
ven objects, furniture, lamps, profi les and
skirting boards, window ledges, etc.
EN
13
11.02.2022 13:06:48 11.02.2022 13:06:48