Scope Of Delivery; Description Of The Device; Installation; Initial Startup - Kärcher ES 1/7 Bp Bedienungsanleitung

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.

Description of the device

For the illustrations, refer to the folding sides.
Illustration A
Handle
1
Locking button
2
Eye
3
ON / OFF switch for electrostatic charging
4
Device ES 1/7 Bp
5
Cover
6
Dosing head
7
Round bottle
8
Tank
9
Connecting piece
10
Fine filter
11
Suction pipe
12
Battery mount
13
*Battery pack Battery Power 18/25 DW
14
Snap hooks
15
Shoulder strap
16
*Mains cable for quick charger
17
*Quick charger Battery Power 18 V
18
Nozzle holder
19
Nozzle
20
Nozzle sealing ring
21
Mounting
22
Earthing connection (functional earth)
23
Code for calling up the online product information
24
page RM 735
Unlocking button
25
ON / OFF button
26
Ground contact
27
Type plate
28
Tank sealing ring
29
Length adjuster
30
Shoulder pad
31
**Earthing cable and plug set
32
**Earthing cable
33
**Earthing plug
34
**Earthing cable and adapter set (extension)
35
**Adapter
36
*ES 1/7 Bp Pack
**Optionally available
The ES 1/7 Bp is a mobile, battery-operated spray unit
for surface disinfection.
To optimize the adhesion of the disinfectant solution to
sloping, vertical or hard-to-reach surfaces, the disinfect-
ant solution can be electrostatically charged by switch-
ing on a high-voltage cascade.
Note
This device contains an earthing connection for func-
tional improvement purposes only.
Mounting the suction pipe
1. Remove the suction pipe from the tank.
Illustration B
2. Push the suction pipe into the socket on the device
as far as it will go.
Battery pack charging
1. Charge the battery pack (see operating instructions
and safety instructions for the battery pack and the
charger).
Inserting the battery pack
CAUTION
Risk of injury and damage if the battery pack is not
engaged!
A battery pack that is not properly engaged can fall out
and cause injury or damage.
Make sure that the battery pack engages correctly in the
battery mount.
1. Push the battery pack into the battery mount on the
device until the battery pack audibly latches into
place.
Illustration C
Filling the round bottle with disinfectant
DANGER
Danger of eye damage, skin and mucous membrane
irritation, breathing difficulties and symptoms of
poisoning when handling disinfectants!
Contact with disinfectants can cause serious eye dam-
age, skin and mucous membrane irritation and breath-
ing difficulties. The ingestion of disinfectants can lead to
symptoms of poisoning such as nausea, headache and
vomiting.
Avoid contact with eyes, skin and mucous membranes.
When working, wear suitable safety goggles or a face
mask as well as electrostatically dissipative protective
gloves and safety shoes in accordance with EN ISO
20344. The insulation resistance must not exceed 100
MΩ.
Wear a suitable respirator of class FFP2 or higher. Do
not breathe the spray mist and aerosols and ensure
good ventilation.
Do not drink disinfectant or disinfectant solution.
Observe the safety and handling instructions on the
product labels or in the disinfectant's safety data sheets.
1. Fill the disinfectant into the round bottle up to the
MAX mark shown.
Illustration D
2. Screw the dosing head onto the round bottle.
English

Installation

Initial startup

15