Technical Specifications; Safety Information - Silvercrest SDI 3500 D5 Bedienungsanleitung

Technical specifications
Power supply
Total rated power
Rated power of left induction field 1
Rated power of right induction field 3
Protection class
Noise emission level

Safety information

WARNING! RISK OF ELECTROCUTION!
Make sure that the mains cable never gets wet or damp when
►
the appliance is in use. Route the cable so that it cannot be
trapped or damaged in any way.
Ensure that the mains plug is connected exclusively to a
►
properly installed, easily accessible mains socket that has a
voltage corresponding to the specifications on the rating
plate. The mains socket must remain easily accessible after
the appliance is plugged in.
After use, always disconnect the plug from the mains power
►
socket. When unplugging the appliance, always pull on the
plug, not the mains cable.
Simply switching off the appliance is not sufficient because
►
mains voltage is still present in the appliance as long as the
mains plug is in the mains socket.
Protect the induction field from damage: Do not load it un-
►
evenly and do not allow objects to fall onto it. Stop using the
appliance if either the induction field or the housing is dam-
aged. If this is the case, remove the plug from the mains power
socket immediately and arrange for the appliance to be re-
paired.
■ 4 │ GB │ IE
220–240 V ~ , 50/60 Hz
3500 W
2000 W
1500 W
II / double insulation
<70 dB (A)
SDI 3500 D5