Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interval
Where?
6.2.1
Recommended wear and tears parts
Drive V-belt assembly
Stripper on the guide tracks
EN
TH5615 | TH5620 | TH5630
158
What?
How?
The clutch of the feed is being adjusted with the adjust-
ment screw in the middle of the scale.
Factory settings are 120 N for a power applied to the
handwheel of the lathe slide contrary to the feed direc-
tion.
Turn it clockwise in order to increase the force of the
clutch.
Turn it anti-clockwise in order to reduce the force of the
clutch.
Setting the clutch
of the feed
longitudinal feed and crossfeed
Replace
Cleaning
Inspection plan for water-mixed cooling lubricants on page 161
Disinfect
Electrical inspec-
tion
Translation of original instruction
engaging lever for
Adjusting screw
Img.6-10: chuck longitudinal feed and cross
feed
Cooling lubricants and tanks on page 160
Obligations of the operating company on page 99
Electrical system on page 108
Maintenance
Version 1.0.3 - 2020-11-2
Werbung
Inhaltsverzeichnis
