Interval
Where?
Maintenance
Version 1.0.3 - 2020-11-2
What?
How?
If the tailstock clamping wears off. Shorten the tension
way with the take-up screw.
tighten
Lubricate respectively fill-in all lubricating nipples and
oiler cups with machinery oil.
Oiling
Lubricating and cleaning the lathe chuck on page 159
Lubricate
Actuate
INFORMATION
The pump is permanently being provided with the oil of the
apron. Therefore, check the oil level of the apron after each
use.
Translation of original instruction
Take-up screw
Img.6-7: Tailstock
Img.6-8: Lubricating nipple
Pump central lubrication
Img.6-9: central lubrication
„Img.6-3: Oil sight glass apron" on page 154
TH5615 | TH5620 | TH5630
EN
157