General Description; Extent Of The Delivery; Functional Description; Overview - Parkside PSBSA 20-Li C3 Originalbetriebsanleitung

General description

An illustration of the most impor-
tant functional components can
be found on the fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- 3-in-1 Cordless Impact Drill
- 2 Bits (PZ1 + PZ2, 50 mm)
- 1 Auxiliary handle
- 1 Storage case
- Instruction Manual
Battery and charger are
not included.
Observe the safety information and
notes on charging and proper use
as shown in the instruction manual
for your battery and charger from
the (Parkside) X 20 V Team series.
A detailed description of the char-
ging process and further informa-
tion can be found in the separate
operating instructions.

Functional description

The 3-in-1 cordless Impact Drill screwdriver
with two-speed gearbox has 20 torque set-
tings, as well as one drill setting and one
impact setting, right/left rotation. The tool
is equipped with a keyless chuck and an
LED work light.
Please refer to the descriptions below for
information on how the operating elements
work.

Overview

1 Drill chuck aperture
2 Keyless drill chuck
3 Torque adjustment ring
4 Speed selector
5 Bit holder
6 Direction of rotation switch
7 LED working light
8 On/off switch
9 Thread
10 Screw bits
11 Additional handle
12 Charger
13 Battery
14 Soft button
15 Battery Indicator
16 Battery release button
17 Storage case
18 Metal clip

Technical data

3-in-1 Cordless
Impact Drill ............PSBSA 20-Li C3
Motor voltage U ..........................20 V
Idling speed n
0
1st gear ............................ 0-440 min
2nd gear ......................... 0-1650 min
Maximum torque .......................... 45 Nm
Span-chuck ............................ 1.5-13 mm
Impact function ........26400 strikes/minute
Weight (without battery/charger) .. 1.52 kg
Drilling diameter
for wood .......................... max. 35 mm
for steel ........................... max. 13 mm
for masonry ...................... max. 13 mm
max. screw diameter .................... 10 mm
Protection category........................... IPX0
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
GB
-1
-1
19