General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PDSSE 450 C3 Originalbetriebsanleitung

GB IE

General description

The illustrations are on the
front fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Electric impact wrench
- 4 sockets
(17 mm, 19 mm, 21 mm, 22 mm)
- 2 spare carbon brushes
- Storage case
- Instruction manual

Overview

1 Tool holder
2 Housing
3 On/off switch
4 Vents
5 Rotational direction switch
6 Service panel
7 Handle
8 Mains cable
9 Storage case
10 Spare carbon brushes
11 Socket, 22 mm
12 Socket, 21 mm
13 Socket, 19 mm
14 Socket, 17 mm

Functional description

The electric impact wrench has clockwise/
counter-clockwise rotation and a
1/2" square drive.
The rotary impact function of the device
converts the force of the motor into uniform
rotary impacts. The striking mechanism
switches on when tightening and loosening
materials. In clockwise rotation, the maxi-
mum torque is limited to 100 Nm.
16

Technical data

Electric impact wrench .........PDSSE 450 C3
Rated input voltage U ....... 230 V~, 50 Hz
Power input P ............................. 450 W
Idling speed n
...................... 3000 min
0
Max. torque for hard screw-driving
applications according to ISO 5393
(clockwise rotation) .................... 100 Nm
Max. torque for hard screw-driving
applications according to ISO 5393
(counter-clockwise rotation) ......... 320 Nm
Tool holder ..................................... 1/2"
Weight (without accessories) .......... 2.3 kg
Safety class ......................................
Protection category .......................... IPX0
Sound power level
) ................... 84,9 dB(A), K
(L
pA
Sound power level (L
measured ............. 95,9 dB(A); K
) ....7,932 m/s²; K = 1,5 m/s²
Vibration (a
h
The total vibration value(s) and the noise
emission value(s) stated have been measu-
red according to a standardised test pro-
cedure and can be used to compare one
power tool with another.
The total vibration value(s) and the speciied
noise emission value(s) stated can also be
used for a provisional assessment of the load.
Warning: The vibration and noise
emissions may deviate from the
speciied values during actual use of
the power tool, depending on how
the power tool is being used and, in
particular, what kind of material is
being worked on.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for ex-
ample, times during which the power
= 3 dB
pA
)
WA
= 3 dB
WA
-1
II