General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PDSSE 450 A1 Originalbetriebsanleitung

General description

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Electric impact wrench
- 4 sockets
(17 mm, 19 mm, 21 mm, 22 mm)
- Spare carbon brushes
- Storage case
- Translation of the original instructions for
use
The illustrations are on the
front fold-out page.

Overview

1 Tool holder
2 Metal housing
3 On/off switch
4 Vents
5 Rotational direction switch
6 Service panel
7 Handle
8 Mains cable
9 Storage case
10 Spare carbon brushes
11 Socket, 22 mm
12 Socket, 21 mm
13 Socket, 19 mm
14 Socket, 17 mm

Functional description

The electric impact wrench has clockwise/
counter-clockwise rotation and a 1/2"
square drive.
The rotary impact function of the device
converts the force of the motor into uniform
rotary impacts. The striking mechanism
switches on when tightening and loosening
materials. In clockwise rotation, the maxi-
mum torque is limited to 100 Nm.

Technical data

Electric impact wrench .................PDSSE 450 A1
Rated input voltage ....... 230 V~, 50 Hz
Power input ............................. 450 W
Idling speed ........................3600 min
max. torque for hard screw-driving
applications according to ISO 5393
(clockwise rotation) ................. 100 Nm
max. torque for hard screw-driving
applications according to ISO 5393
(counter-clockwise rotation) ...... 320 Nm
Tool holder .................................. 1/2"
Weight ..................................... 2.1 kg
Safety class ..................................
Protection category ...................... IP20
Sound power level
(L ) ................ 100 dB (A),
pA
Sound power level (L
Guaranteed ..................... 114 dB (A)
Measured ..........111 dB (A);
Vibration (a ) .... 23.35 m/s
h
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
GB IE
= 3 dB
K
pA
)
WA
= 3 dB
K
WA
, K= 1.5 m/s
2
-1
II
2
5