General Description; Extent Of The Delivery; Overview; Functional Description - Parkside PDSSE 450 B2 Originalbetriebsanleitung

General description

The illustrations are on the
front fold-out page.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Electric impact wrench
- 4 sockets
(17 mm, 19 mm, 21 mm, 22 mm)
- 2 spare carbon brushes
- Storage case
- Instruction manual

Overview

1 Tool holder
2 Metal housing
3 On/off switch
4 Vents
5 Rotational direction switch
6 Service panel
7 Handle
8 Mains cable
9 Storage case
10 Spare carbon brushes
11 Socket, 22 mm
12 Socket, 21 mm
13 Socket, 19 mm
14 Socket, 17 mm

Functional description

The electric impact wrench has clockwise/
counter-clockwise rotation and a
1/2" square drive.
The rotary impact function of the device
converts the force of the motor into uniform
rotary impacts. The striking mechanism
switches on when tightening and loosening
materials. In clockwise rotation, the maxi-
mum torque is limited to 100 Nm.

Technical data

Electric impact wrench .........PDSSE 450 B2
Rated input voltage U ....... 230 V~, 50 Hz
Power input P ............................. 450 W
Idling speed n .......................3600 min
0
Max. torque for hard screw-driving
applications according to ISO 5393
(clockwise rotation) .................... 100 Nm
Max. torque for hard screw-driving
applications according to ISO 5393
(counter-clockwise rotation) ......... 320 Nm
Tool holder ..................................... 1/2"
Weight (without accessories) .......... 2.3 kg
Safety class .....................................
Protection category ......................... IP20
Sound power level
(L ) ..................88.32 dB(A);
pA
Sound power level (L
measured ........... 99.32 dB(A);
Vibration (a ) ...... 8.652 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission value
may differ during actual use of the
power tool from the stated value de-
pending on the manner in which the
power tool is used, in particular which
kind of work piece is processed.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for ex-
ample, times during which the power
tool is turned off and times when the
tool is turned on but is running idle).
GB
K = 3 dB
pA
)
WA
K = 3 dB
WA
; K= 1.5 m/s
2
-1
II
2
5