Safety Information For Sawing Back And Forth - Parkside PSTKA 12 B3 Originalbetriebsanleitung

tery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specific-
ally designated battery packs. Use
of any other battery packs may create a
risk of injury and fire.
c) When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accident-
ally occurs, flush with water. If li-
quid contacts eyes, additionally
seek medical help. Liquid ejected from
the battery may cause irritation or burns.
e) Do not use a battery pack or tool
that is damaged or modified. Dam-
aged or modified batteries may exhibit un-
predictable behaviour resulting in fire, ex-
plosion or risk of injury.
f) Do not expose a battery pack or
tool to fire or excessive temperat-
ure. Exposure to fire or temperature above
130 °C may cause explosion.
g) Follow all charging instructions and
do not charge the battery pack or
tool outside the temperature range
specified in the instructions. Char-
ging improperly or at temperatures outside
the specified range may damage the bat-
tery and increase the risk of fire.
6. SERVICE
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery
packs. Service of battery packs should
only be performed by the manufacturer or
authorized service providers.
Safety information for
sawing back and forth
• Hold the power tool by insulated
gripping surfaces, when perform-
ing an operation where the cutting
accessory may contact hidden wir-
ing or its own cord. Cutting accessory
contacting a "live" wire may make exposed
metal parts of the power tool "live" and
could give the operator an electric shock.
• Use clamps or another practical
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by your hand or
against the body leaves it unstable and
may lead to loss of control.
• Only use accessories that are re-
commended by PARKSIDE. Unsuit-
able accessories can result in electric shock
or fire.
Additional safety instructions for
jigsaws
• Keep hands away from the sawing
area. Do not reach underneath the work-
piece. Upon contact with the saw blade
there is a risk of injury.
• Only when the electric tool is
turned on should the sawing blade
be moved against the workpiece.
Otherwise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate is se-
cure during sawing. A tilted saw blade
may break or cause a kickback.
• After you have finished work, turn
the power tool off and do not pull
the sawblade out of the cut until it
has come to a standstill. In this way
you will avoid any kickback and can safely
put down the power tool.
• Use only undamaged sawblades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or cause
kickback.
• Do not brake the sawblade after
switching the device off by apply-
ing side pressure. The saw blade may
be damaged, break or cause a kickback.
GB
25