Safety Information For Sawing Back And Forth - Parkside PSSSA 20-Li B2 Originalbetriebsanleitung

of the power tool is maintained.
b) never repair damaged batte-
ries. All battery repairs should be
carried out by the manufacturer or au-
thorised customer service centres only.
Safety information for
sawing back and forth
• Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with a live wire can also cause a
charge in metal parts of the device and
result in an electric shock.
• Fasten and secure the workpie-
ce by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock or fire.
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the bla-
de there is a risk of injury.
• Move the power tool against the work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate is resting
securely on the workpiece during sa-
wing. A tilted saw blade may break or
cause a kickback.
• After you have finished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come to
a standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after swit-
ching the device off by applying side
pressure. The saw blade may be dama-
ged, break or cause a kickback.
• Use suitable detectors in order to find
hidden supply lines or consult the local
utility company.
Contact with electric cables can lead to
fire and electric shock.
Damage to a gas pipe can cause an
explosion. Penetration into a water line
causes property damage.
• Check the material to be pro-
cessed for foreign bodies, such
as nails, screws etc. which must
be removed.
• Secure the workpiece. A workpie-
ce that is retained with clamping appli-
ances or a vice is held more securely
than with your hand. Do not support
the workpiece by hand or foot.
• Hold the power tool tightly while wor-
king and ensure a secure footing.
• Do not touch any objects or the
ground with the saw running.
There is a risk of kickback.
• Switch the appliance off immedi-
ately if the saw blade jams. Force
apart the saw cut and pull the
blade out carefully. This can lead to
loss of control over the power tool.
• Do not saw any materials (e.g.
lead-based paints and coatings
or materials containing asbes-
tos) whose dust can be harmful.
• Wait until the power tool has stopped
GB IE
27