Residual Risks; Preparation; Control Elements; Attaching And Removing The Saw Blade - Parkside PSTKA 12 B3 Originalbetriebsanleitung

GB
• Use suitable detectors to determ-
ine if there are hidden supply lines
or contact the local utility company
for assistance. Contact with electric
cables can cause fire and electric shock.
Damaging gas lines can lead to explosion.
Breaking water pipes causes property dam-
age.
• Always wait until the power tool
has come to a complete stop be-
fore placing it down. The application
tool can jam and cause you to lose control
of the power tool.

Residual risks

There will always be residual risks even if you
operate this power tool according to the in-
structions. The following hazards may occur
in connection with the type and design of this
power tool:
• Hearing damage if suitable ear protection
is not worn.
• Health injuries resulting from the effect of vi-
bration on the hands and arms in the event
that the device is used over a longer period
of time or is not used and maintained prop-
erly.
• Cutting injuries
WARNING! Danger due to electromag-
netic field generated while the machine is in
operation. Under certain circumstances, this
field may negatively affect active or pass-
ive medical implants. In order to reduce the
danger of serious or fatal injuries, we recom-
mend that individuals who wear medical im-
plants should consult their doctor and the man-
ufacturer of the implant before operating the
machine.

Preparation

WARNING! Risk of injury due to uninten-
tional start-up. Only insert the rechargeable
battery into the device once the device is fully
prepared for use.

Control elements

Familiarise yourself with the operating elements
before using the device for the first time.
26
• On/Off switch (5)
• Switching on: Push forward
• Switching off: Pull backward
• Pendulum stroke switch (14)
Set pendulum movement of the saw blade
in 3 positions:
• 0 - no pendulum motion
• 1 - small pendulum motion
• 2 - medium pendulum motion
• Rotary wheel (1)
Set stroke rate in 6 levels.
Attaching and removing the
saw blade
CAUTION! Risk of injury when
touching the saw blade. Wear pro-
tective gloves when attaching the saw
blade.
Requirements
• The saw blade has a T-shank mount (single
lug shank) like the supplied saw blades
(16/17).
• The saw blade is suitable for the respective
material. Included are a large-toothed saw
blade for wood and a fine-toothed saw
blade for metal and plastic.
• The chuck is free of splinters or other materi-
al residue.
Installing the saw blade (Fig. B)
1. Turn the chuck (21) as far forward as pos-
sible and hold it firmly in this position.
2. Place the saw blade (16/17) into the chuck
(21). When inserting the saw blade, make
sure that the back of the saw blade is in the
notch of the guide roller (15).
3. Release the chuck (21).
4. Make sure that the saw blade (16/17) is
attached correctly and the teeth are point-
ing in the cutting direction.
Removing the saw blade (Fig. B)
1. Hold the saw blade (16/17) firmly.
2. Turn the chuck (21) as far forward as pos-
sible and hold it firmly in this position.
3. Remove the saw blade (16/17) from the
chuck (21).