Introduction; Intended Use - VOLTCRAFT VC33 Bedienungsanleitung

1 Introduction

Dear customer,
Thank you for purchasing this product.
If there are any technical questions, please contact:
www.conrad.com/contact

2 Intended use

The product is a digital multimeter. Use the product to:
■
Measure and display electrical parameters in the measurement category
CAT III (up to 600 V) against earth potential.
■
Measure direct voltage up to 600 V/DC
■
Measure alternating voltage up to 600 V/AC
■
Measure resistance up to 60 MΩ
■
Measure capacitance up to 60 mF
■
Test for continuity
■
Test diodes
■
Test for nearby voltage using the NCV function
■
Detect live and neutral wires in an alternating current circuit
If you use the product for purposes other than those described, the product may be
damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this
product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners.
All rights reserved.
34