Fig. 12: Fastening the power
cables
5 Installation at Site
CAUTION
Flow-induced motion
Damage to the power cable!
▷ Run the power cable upwards without slack.
1. Run the power cables directly upwards without slack, and fasten.
2. If necessary, adjust the length of the power cables to the site requirements.
3. After shortening the cables, correctly re-affix the markings of the individual
cores at the cable ends.
DANGER
Touching the pump set during operation
Electric shock!
▷ Make sure that the pump set cannot be touched during operation.
Sanipump VX 50
75 of 331