SFA Sanipump VX 50 Bedienungs- Und Installationsanleitung Seite 72

70 of 331
5 Installation at Site
Fitting the guide rail (arrangement with 1 guide rail)
894
710
60.3
33.7
72-1
UG1273704
Fig. 8: Fitting 1 guide rail
1. Position rail 710 in the recess of duckfoot bend 72.1. Place the rail in a vertical
position.
2. Mark the length of rail 710 (up to the lower edge of the mounting bracket),
taking into account the adjusting range of the slotted holes in mounting
bracket 894.
3. Shorten rail 710 with a 90° cut to the pipe axis. Debur the rail inside and
outside.
4. Insert mounting bracket 894 into guide rail 710 until the mounting bracket rests
on the rail end.
Sanipump VX 50