Cleaning; Storage - Silvercrest SDBR 420 A2 Bedienungsanleitung

Cleaning

RISK OF ELECTROCUTION!
► Remove the plug before cleaning the appliance . There is a risk
of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it .
Otherwise, there is risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemical cleaning agents .
They can damage the surface and also lead to irreparable
damage to the appliance .
■ Clean the housing with a soft, dry cloth only .
■ Clean the sole of the iron 8 using a slightly damp cloth . For
stubborn dirt, add a little mild detergent to the cloth . Afterwards,
wipe clean with a cloth moistened only with water to ensure that
no detergent residue remains .

Storage

RISK OF INJURY!
► Allow the appliance to cool down . Otherwise, there is risk of
burns!
■ Empty the remaining water out of the water tank by opening the
filler opening 1 on the water tank, turning the appliance upside
down over a sink and rocking it gently .
■ Wrap the power cable around the cable retainer q . Guide the
end of the cable through the cable clip 0 so that the cable is
retained .
■ Place the iron in the case e and close the zip .
SDBR 420 A2
GB │ IE │ NI │ CY │ 13 ■