Cleaning; Cleaning The Housing And Soleplate; Self-Cleaning Function - Silvercrest SDBB 2400 A1 Bedienungsanleitung

Cleaning

RISK OF ELECTROCUTION!
► Always unplug the appliance before cleaning it.
There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Otherwise, there is
risk of burns!

Cleaning the housing and soleplate

ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They can
damage the surface and also lead to irreparable damage to the appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the soleplate
gent.

Self-cleaning function

1) Fill the water tank to the MAX marking.
2) Insert the plug into the mains power socket.
3) Set the temperature control
4) Set the steam control
5) Allow the steam iron to heat up until the control lamp
nently.
6) Hold the steam iron horizontally over a sink or suitable container.
7) Press and hold down the self clean button
and forth a little. Steam and boiling water will flow from the steam holes in
the soleplate
8) Release the self clean button
is used up.
9) Dry the soleplate
forth several times over a towel or an old piece of material.
10) Allow the steam iron to cool down before placing it in storage.
■ 12 │ GB │ IE
0
using a damp cloth and a mild, non-scouring deter-
6
to the max setting.
3
to the highest level
0
. Any impurities that may be present are flushed out.
q
as soon as all of the water in the water tank
0
thoroughly. To do this, move the soleplate
.
7
lights up perma-
q
. Move the steam iron back
0
SDBB 2400 A1
back and