Preparatory Measures - Pkm KSGS351 IX Bedienungsanleitung

NOTICE! You should contact a qualified technician if you want to have the
door swing reversed. Only try to carry out the steps described below when
you believe that you are qualified to do so.
NOTICE! Adjust the door properly before you finally tighten the screws of the
hinges. The seal must close properly.
NOTICE! Do not tilt the appliance more than 45°.
NOTICE! Any damage that is caused to your appliance by improper change
of the door hinge position will not be fixed free of charge, even if the
guarantee period of the appliance is still valid.
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers
that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the door. Lean the
appliance against a solid and immovable surface so it will not slip while changing the
hinge positions.
➢ Do not lay the appliance flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the door.
➢ Always remove the door carefully. Keep the door in a safe place so that it cannot
be damaged.
T
OOLS REQUIRED
F
LAT BLADED SCREWDRIVER
Depending on model.
27
P
REPARATORY MEASURES
(
NOT INCLUDED IN THE SCOPE OF DELIVERY
~ 88 ~
27 from the appliance so
C -
ROSS HEAD SCREWDRIVER
)