Preparatory Measures - Pkm KS94 Bedienungsanleitung

NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers from the fridge so that
they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing the
hinge positions.
➢ Do not lay the unit flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the door(s) carefully. Keep the door(s) in a safe place so that they
cannot be damaged.
1. Disconnect the appliance from the power supply (unplug).
2. Slightly tilt the appliance back and secure it in this position. Do not tilt the appliance
more than 45 0 !
3. Remove the left screw hole cover (B) on the top of the appliance (A); s. fig. below.
4. Remove the right hinge cover (C) on the top of the appliance (A); s. fig below.
A
T
OP OF THE APPLIANCE
B
S
CREW HOLE COVER
C
H
INGE COVER
P
REPARATORY MEASURES
H
OW TO CHANGE THE HINGE POSITION
0
.
60