Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTICE! If you use the appliance for the first time or the appliance has been
disconnected from the mains for a longer period of time, allow the appliance
to cool down for 3 until 4 hours on medium temperature setting (s. chapter
4.5
SETTING OF THE TEMPERATURE
food in the appliance. If you place food in the appliance before it has reached
its normal operating temperature, the food can thaw and / or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
3. Do not start the appliance immediately after installation. Wait at least 4 - 6 hours to
ensure proper operation.
4. Connect the appliance to the mains properly.
5. The setting of the temperature of the appliance can be adjusted manually by pressing
the relevant button until the desired value will be indicated (s. chapter 4.5 S
OF THE TEMPERATURE
6. The noise generated by the compressor and the gases / liquids of the appliance is
normal.
7. If operation was interrupted, wait 5 minutes before restart.
8. The appliance needs some time to balance temperatures when you have changed the
settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you set
the temperature of the appliance these aspects should be taken into account.
9. Due to the difference of pressure, the doors may be difficult to open shortly after
closing. Wait a few minutes and you can open the doors easily.
10. Operate the appliance according to the instructions described in the following
chapters.
➢ Set the temperature of the appliance to a medium setting and let the empty
appliance operate for 3 to 4 hours (s. chapter 4.5 S
➢ Select your desired setting. You can now store food in the appliance (depending on
the selected working mode: fridge mode or freezer mode).
4.2 Description of the appliance
The appliance can be used as a fridge or freezer (fridge mode or freezer mode).
et seq.) before you place any fresh or frozen
et seq.).
I
NITIAL OPERATION
~ 96 ~
CLEANING AND MAINTENANCE
ETTING OF THE TEM
).
ETTING
-
)
PERATURE
Werbung
Inhaltsverzeichnis
Fehlerbehebung
