Preparatory Measures - Pkm KS82.3A+UB Bedienungsanleitung

least two persons; otherwise you may hurt yourself or damage the
appliance.
NOTICE! You should contact a qualified technician if you want to have the
door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws
of the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45°.
►
Empty the appliance.
►
If possible, remove all door trays, glass shelves and drawers from the fridge so
that they cannot be damaged.
►
lt is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing
the hinge positions.
►
Do not lay the unit flat as this can damage the cooling system.
►
All parts removed must be saved for proper reinstallation of the doors.
►
Always remove the door(s) carefully. Keep the door(s) in a safe place so
that they cannot be damaged.
1. Disconnect the appliance from the power supply (unplug).
2. Slightly tilt the appliance back and secure it in this position. Do not tilt the appliance
more than 45°!
3. Remove the screws (1) and then the top metal-panel (6). Now remove the door.
Put the door on a soft surface to avoid scratches. A second person should assist
you.
4. Unscrew the top hinge axis (5) from the top panel. Now screw the axis to the
left side of the cover panel (6).
5. To remove the bottom hinge (2) remove the two screws (8).
6. Now unscrew the left front foot (4) and fix it on the opposite right side.
7. Move the complete bottom hinge (2) together with the other hinge axis (7) to
the opposite left side and fix it with the two screws (8). Also install the other
front foot.
8. Place the door carefully on the hinge axis (7) of the bottom hinge. I<eep the door
properly ad justed.

PREPARATORY MEASURES:

How
TO CHANGE THE HINGE POSITION:
A second person should assist you.
58