Preparatory Measures - Pkm KG173IX-M Bedienungsanleitung

NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves and drawers from the appliance
so that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing
the hinge positions.
➢ Do not lay the appliance flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the doors carefully. Keep the doors in a safe place so that they
cannot be damaged.
T
OOLS REQUIRED
F
LAT BLADED SCREWDRIVER
1. Disconnect the appliance from the power supply (unplug).
2. Open the doors of the appliance (appliance in upright position) and remove the
glass shelves / door trays / drawers, etc. of the appliance, if possible.
3. Close the doors.
4. Remove the top door hinge cover (1) carefully using a flat bladed screwdriver; s.
fig. below, observe the direction of the arrow!
P
REPARATORY MEASURES
(
NOT INCLUDED IN THE SCOPE OF DELIVERY
M
ONKEY WRENCH
H
OW TO CHANGE THE HINGE POSITION
~ 69 ~
0
.
P
HILLIPS SCREWDRIVER
)