Pkm KSGS351 IX Bedienungsanleitung Seite 89

A
DDITIONAL PARTS REQUIRED
T
OP LEFT DOOR HINGE COVER
T
OP LEFT DOOR HINGE
1. Disconnect the appliance from the power supply (unplug).
2. Open the door of the appliance (appliance in upright position) and remove the glass
shelves / door trays / drawers, etc.
3. Close the door.
4. D
OOR HANDLE
THE DOOR HANDLE
5. Unscrew the top door hinge cover and remove it. Install the communication wire
into the opening on the top of the appliance.
6. Unscrew the top right door hinge and remove it. Keep the top right door hinge cover
and the top right door hinge in a safe place.
7. Remove the door sleeve and the door magnet. Keep the two parts (door sleeve and
magnet) in a safe place. They will be needed again later in the process of changing
the door hinges.
Depending on model.
28
/ 1
X
/ 1
X
H
OW TO CHANGE THE HINGE POSITION
28
: Deinstall the door handle; s. also chapter 3.4 I
.
(
IN THE PLASTIC BAG
L
EFT DOOR BLOCK
B
OTTOM LEFT DOOR HINGE
of the appliance, if possible.
~ 89 ~
)
/ 1
X
/ 1
X
NSTALLATION OF