Display Elements; Status Led; Cleaning - Balluff Matrix Vision BVS CA-SF4 001 mvBlueFOX3-4 Serie Betriebsanleitung

BVS CA – SF4 - _ _ _ _ _ _ - _ _ _ _ _ _ - 001
NOTE
The digital sensor inputs correspond to the guideline concerning inputs. EN 61131‑2, Type
3.
Digital inputs and outputs
Details to the characteristics of the digital inputs and outputs can be found in the online manual:
•
→ https://www.matrix-vision.com/manuals/mvBlueFOX3/mvBC_page_tech.html
3.5

Display elements

Status LED

The RGB signal LED indicates the different status of the mvBlueFOX3-4.
3.5.1 Status LED
No power or no bootloader found
Bootloader was recognized and FPGA is booting-up
mvBlueFOX3-4 is running
mvBlueFOX3-4 is streaming images
mvBlueFOX3-4 is busy (e.g. file upload)
Waiting for USB connection (external power is connected)
Error or if you put the device into standby
3.6

Cleaning

The outside of the mvBlueFOX3-4 can be cleaned with a soft cloth. Persistent dirt can be removed with a cloth that is
first moistened with a soap solution and wrung out.
→ After wiping off the dirt spots, wipe the camera with a dry cloth.
www.matrix-vision.com
Status LED color
Off
White
Yellow
Green
Yellow blink
White blink
Red
13