Maintenance, Inspection, Repair; Disposal - Balluff Matrix Vision BVS CA-SF4 001 mvBlueFOX3-4 Serie Betriebsanleitung

BVS CA – SF4 - _ _ _ _ _ _ - _ _ _ _ _ _ - 001
2.2.4

Maintenance, inspection, repair

The working principle used in this mvBlueFOX3-4 is maintenance- and wear-free. The operator must regularly inspect
the mvBlueFOX3-4 for signs of damage or malfunctions in line with the operating conditions and environmental influ-
ences. If any damage or wear is found, the mvBlueFOX3-4 must be immediately taken out of operation and secured
against unauthorized use.
Only service technicians from MATRIX VISION GmbH may repair defective devices. Intervention in the product by the
operator is not permitted due to safety reasons. The mvBlueFOX3-4's housing may not be opened or
NOTE
In the interests of product improvement, MATRIX VISION GmbH reserves the right to
change the technical data of the product and the content of this manual at any time without
notice.
2.3

Disposal

Observe the national regulations for disposal.
NOTE
Additional information can be found at www.matrix-vision.com on the product page.
8
loosened!f_