Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Using Touch Display; Display - Room Temperature Display, Various Functions; Display - Heat Output Display - Austroflamm Scotty Duo Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

11 | Operation

11.3 Operation using touch display

11.3.1 Display - room temperature display, various functions

1
2
14
13
Fig. 54: Room temperature display, various
functions
1 Stove operating
condition
3 Error
5 Hybrid start en-
abled
7 Temp. unit
9 Menu with heat
output settings
11 Release ash pan
13 SmartSpot is
connected
Fig. 55: Removing the ash pan

11.3.2 Display - heat output display

1
8
7
Fig. 56: Heat output display
1 Heat output
level
3 back to room
temperature
display
5 Tips
7 Statistics
42
3 4
5 6
7
11
10
9
8
12
2 Target temper-
ature
4 Warning
6 Timer enabled
8 to start screen
10 Delay timer
12 current room
temperature
14 filling level in-
dicator
2
3
6
5
4
2 Air distribution
fan
4 Start / stop func-
tion
6 Settings
8 Heating times
EN
You can switch to the relevant setting or function by press-
ing the corresponding symbol.
The desired target temperature can be set between
5°C and 40 °C by pressing the buttons in 0.2°C incre-
ments. The setting is immediately applied. The cur-
rent room temperature is by default measured at the
black room temperature sensor on the back of the
appliance.
The error- and warning symbols are only displayed
when there is an error or a warning. The error is dis-
played in detail by tapping the symbol.
The "Heating time enabled" symbol is only displayed
if heating times are programmed in the timer menu.
The "Hybrid start enabled" symbol shows that your
oven is ready for log operation via pellet ignition.
The optionally available SmartSpot - a wireless ther-
mostat - works in the stove.
The riddling grate is closed by pressing the "Release
ash pan" button. This process takes approximately 90
seconds. After this the ash box can be removed.
This feature is only possible in the "OFF" operating
condition.
You can switch to the relevant setting or function by press-
ing the corresponding symbol.
The desired heat output can be set by pressing the
buttons. This setting is immediately applied.
The stove is started or stopped by pressing the start /
stop button for longer than 2 seconds.
Operating manual Scotty Duo

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Scotty duo 2.0

Inhaltsverzeichnis