Commissioning; First Start-Up - Austroflamm Scotty Duo Betriebsanleitung

Operating manual Scotty Duo
13

Commissioning

13.1 First start-up

1) The hybrid stove must be connected to the chimney. Sufficient combustion air must be supplied.
2) Remove the accessories from the pellet hopper and the firebox.
3) Fill the hopper with pellets and close the hopper lid.
4) Insert power cable and set tumbler switch on the back of the hybrid stove to "I".
ð The Austroflamm logo will now appear on the display.
ð This is followed by the main operating level with temperature displays and hopper level.
5) The pellet screw conveyor must be filled before the first start-up.
To do so, open and close the firebox doors (confirm the question "Have you inserted log?" that
follows it on the display with "YES").
6) Next start the manual filling process.
ð For more detailed information see menu item: Manual pellet feed [}on page 50]. This process
takes approximately 5 minutes.
7) To start the hybrid stove in pellet mode, press the knob for more than 2 seconds or press "Start"
on the display.
EN 13 | Commissioning
55