Function - Setting Timers And Heating Times - Austroflamm Scotty Duo Betriebsanleitung

Operating manual Scotty Duo

11.4.4 Function - setting timers and heating times

1
Fig. 59: Heating times
1 Back
3 Edit heating
time
1
7
6
Fig. 60: Creating heating times
1 Back without
saving
3 Save
5 End of heating
time
7 Weekdays
Set heating times can overlap one another.
If individual heating times overlap, if different temperatures are specified then the heating time with
the higher target temperature is enabled.
Example of heating times for a whole week:
TIMER 1
TIMER 2
TIMER 3
TIMER 4
Please note: Only 3 heating times may be set per weekday.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Mo 18°C
n
Tu 18°C
e
We 18°C
d
Th 18°C
u
2
3
4
2 Enable heating
times
4 Create new
heating time
2 3
5 4
2 Delete heating
time
4 Target temper-
ature
6 Start of heating
time
Weekday
Monday - Sunday
Monday - Friday
Monday - Friday
Saturday - Sunday
22°C
22°C
22°C
22°C
EN
Pressing the "TIMERS" button in the heating output display
takes you into the "Heating times" menu.
Enable heating times by pressing "ON" in the top right
corner of the display.
A maximum of 3 heating times per day can be saved. A total
of 6 different heating times can be saved.
Creating and editing new heating times
1) Set the weekdays, the start and end of the heating
time and the room temperature accordingly.
2) Save the heating time by pressing the "Save" symbol.
ð You will then be automatically taken back to the
heating times list.
You can delete an existing heating time as follows:
3) Highlight the heating time and press the "Delete heat-
ing time" symbol.
ð The timer function may only be enabled after the
desired heating time has been set.
When setting heating times, please note the following: The
timing must be in the future.
Times
00:00 – 23:59
06:00 – 08:00
17:00 – 22:00
07:00 – 22:00
18°C
18°C
18°C
18°C
11 | Operation
Temp.
18°C
22°C
22°C
22°C
22°C 18°C
22°C 18°C
22°C 18°C
22°C 18°C
45