Initial Operation, Using The Stove; Operating The Stove Via Touch Display - Austroflamm Mo Duo Benutzerhandbuch

CLOU DUO, MO DUO

3. Initial Operation, Using the Stove

First steps:
1. The stove must be connected to the flue. There must be a sufficient supply of combustion air.
2. Remove the accessories from the pellet hopper and the firebox. Fill the hopper with pellets and close
the hopper lid.
3. Plug in the power cable and set the toggle switch on the back of the stove to "I ".
4. The display will now show the Austroflamm logo. This is followed by the main operating menu with tem-
perature indicators and hopper level.
5. Before the initial start, the pellet worm conveyor must be filled. To do this, open and close the firebox
door. (Confirm the subsequent question on the display: "Have you inserted firewood?" with "YES".)
Next, start the manual filling process. For more detailed information, see the menu item: Manual pellet
feed. This process takes about 5 minutes.
6. To start the stove in pellet mode, press the rotary knob for longer than 2 seconds or press "START" on
the display.
3.1.

Operating the stove via touch display

Display − Room temperature indicator, various functions
Stove operating status
Tank level indicator
SmartSpot is
connected
By pressing the appropriate symbol, it is possible to switch to the desired setting or function.
The desired temperature can be set by pressing the buttons at 0.2 °C intervals between 5 °C and
40 °C. The setting is accepted immediately. The current room temperature is measured
necessary by the black, room- temperature sensor cable on the back of the
The warning or error icons appear only when a warning or error is detected. The error is displayed in
detail by touching the icon.
The icon "Heating time activated" is only displayed if heating times are programmed in the timer menu.
The "Hybrid start activated" symbol indicates that your stove is ready for firewood operation via pellet
ignition.
The optionally available SMART SPOT - a radio-controlled thermostat - works in the stove.
4 www.austroflamm.com
4
Hybrid start active
Target temperature
Error Warning
Release Ash drawer
Current
room temperature
Timer active
Temp. unit
Home screen
Menu with
Delay timer
heat output setting
appliance.
EN
english
Standard