Austroflamm Scotty Duo Betriebsanleitung Seite 36

10 | Operation
• A maximum number of 3x90° bends must not be exceeded. Each bend must have a cleaning aper-
ture.
• The chimney must be resistant to condensation.
• The chimney must provide at least 12 Pa draught in order to be able to adequately draw off ex-
haust gases even in the event of a power failure.*
1
Fig. 43: Electrical connection
36
EN
Electrical connection
Your stove is designed for connection to a 230 V / 50 Hz
mains. The connection cable is included.
The mains socket connection (1) is located on the rear of
the appliance and is protected with a T2.5 A glass tube
fuse.
The power consumption of your appliance is visible on the
nameplate.
Operating manual Scotty Duo