Austroflamm Scotty Duo Betriebsanleitung Seite 31

Operating manual Scotty Duo
Fig. 33: Checking the spacings
Fig. 34: Mounting the trims
Fig. 35: Aligning the cladding
3
2
EN
27) Finally, check that the ceramic cladding has the same
spacing on all sides.
ð If necessary use the adjusting screws to readjust
the spacings.
28) Remount the two trims at the back.
29) Align cladding with adjusting screws (3) (TX10) and
tighten the screw (2).
9 | Installation
31