Austroflamm Scotty Duo Betriebsanleitung Seite 26

9 | Installation
1
13 mm
Fig. 19: Distance to 13 mm
Fig. 20: Opening the hopper lid
Fig. 21: Opening the hopper cover
1
Fig. 22: Aligning the upper ring
26
1
2
2
EN
10) Check and adjust the distance (1) to 13 mm (M5/
SW8).
11) Open the hopper lid (1) and use a suitable tool to
keep it in the half-open position.
12) Remove hopper cavity (2).
13) Mount the upper ring.
14) Use the adjusting screws (1) to align the upper ring.
15) Mount and tighten the four nuts (2) (M5/SW8).
Operating manual Scotty Duo