Deleting The Hardboot Configuration - Guntermann & Drunck HardBoot plus Installation Und Bedienung

Operating with HardBoot view
6. Click on the Query configuration (Konfiguration abfragen) button in the field
Device list (Device-Liste). The software controls automatically if and how many
slave devices are available at the master and sets the ticks respectively.
7. The section Channel settings (Kanal-Einstellungen) shows all channels of the Hard-
Boot system. If you want to assign an individual name to a channel, double click
on that channel and choose a significant name.
As an alternative, you can also reach the dialogue to change the name by right-
clicking on the respective row. Select the entry Rename (Umbenennen) in the
context menu.
8. Click the OK button to save the settings of the HardBoot system.
9. Click the OK button to save the overview with the saved HardBoot configurations.

Deleting the HardBoot configuration

If a HardBoot system is being removed from the local network, the assigned settings
can be deleted from the location configuration.
How to delete the configuration of the HardBoot system in the software:
1. Click the entry HardBoot configuration (HardBoot-Konfiguration) in the Settings (Ein-
stellungen) menu.
2. Enter the administrator password and confirm the entry be pressing the OK button.
The administrator password only needs to be entered if no administrating func-
tion has been called up in the current session.
3. Right-click with the mouse on the HardBoot system whose settings you want to
delete.
4. Click the Delete (Löschen) button to delete the configurational settings completely:
Figure 16: Delete (Löschen) entry in the context menu
23 · G&D HardBoot plus