Guntermann & Drunck HardBoot plus Installation Und Bedienung Seite 48

Network configuration
How to change the network configuration of the HardBoot plus:
Press the M key to change the settings displayed in the configuration menu. After-
wards, various configuration settings are displayed:
1. Reset configuration to default values (Y/N)?
If you want to change the settings of the HardBoot plus, press the N key follo-
wed by the enter key.
To reset the default settings, press the Y key followed by the enter key. Now,
the HardBoot plus restarts.
In the following settings, the parenthesis show which setting is currently active.
If you want to take over these settings and therefore carry on with the next
step, press the enter key.
2. Should this target obtain IP settings from the network [N]?
If a DHCP server is operated within the network, the HardBoot plus requests an IP
address from the DHCP server. As an alternative, the network configuration can
also be carried out manually.
To control the HardBoot plus with the software HardBoot view at all times, the
allocation of a permanent IP address is recommended.
Ask the network administrator for the IP address of the HardBoot plus if you pre-
fer to use the DHCP server. The IP address is required to access the HardBoot plus
with HardBoot view.
If you want to collect the network parameter manually, press the N key follo-
wed by the enter key.
If you want to activate the usage of a DHCP server, press the Y key followed by
the enter key. Confirm the following three settings with the enter key. After-
wards, the HardBoot plus reboots.
3. Static IP address [192.168.100.100]?
Collect the IP address of the HardBoot plus and press the enter key afterwards.
4. Subnet Mask IP address [255.255.255.0]?
Collect the subnet mask of the HardBoot plus and press the enter key after-
wards.
5. Gateway IP address [0.0.0.0]?
Collect the IP address of the Gateway and press the enter key afterwards.
Confirm the following three settings with the enter key. These settings are not
relevant for operating the HardBoot plus with the supplied software HardBoot view.
9 · G&D HardBoot plus