Product Description; Scope; General; Scope Of Delivery - axing MIE 8-00 Betriebsanleitung

1. Product description

1.1.

Scope

These operating instructions apply to the headends described below with firmware version v1.03.
1.2.

General

The MIE headends consist of a basic unit with power supply. The basic unit is equipped with either one or two modules.
MIE 8-00 Includes 1 module, transmodulates max. 512 input streams in 8 DVB-C or 6 DVB-T output channels.
MIE 16-00 Includes 1 module, transmodulates max. 512 input streams in 16 DVB-C or 12 DVB-T output channels.
MIE 32-00 Includes 2 modules, transmodulates max. 2 × 512 input streams in 2 × 16 DVB-C or 2 × 12 DVB-T output channels.
MIE 4-02 Includes 1 module, transmodulates max. 512 input streams in 4 DVB-T2 output channels.
MIE 8-02 Includes 2 modules, transmodulates max. 2 × 512 input streams into 2 x 4 DVB-T2 output channels.
MIE 3-02 Includes 1 module, transmodulates max. 512 input streams in 3 DVB-T2 output channels.
MIE 6-02 Includes 2 modules, transmodulates max. 2 × 512 input streams into 2 x 3 DVB-T2 output channels.
Common Features:
•
Two redundant IPTV inputs (900 Mbps) per module possible
•
Converts SPTS / MPTS to DVB
•
Remux | Crossmultiplex
•
PID Filtering / PID remapping
•
Web-based configuration
•
Suitable for AXING SMARTPortal
•
Supports SNMP
•
Device redundancy configurable (software extension required)
•
OTA upgrade e.g. for Set Top Boxes possible
•
Interface for CASimulcrypt Server (software extension required)
•
19 "housing, 1RU
•
Two redundant power supply units 100...240 VAC
Devices with operating voltage of 36...60 VDC
In addition, devices with an operating voltage of 36...60 VDC are available.
These are designated MIE xx-xx/48 (example MIE 32-00/48).
1.3.

Scope of delivery

1 × Headend
2 × AC power cord (MIE 4-02 and MIE 8-02 only)
1 × Quick start guide
2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf | Page 5 of 68