Emm Configuration - axing MIE 8-00 Betriebsanleitung

Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02

4.10.6. EMM Configuration

EMM contains CAS supplier private information which for example specifies the authorization levels of subscribers or groups of
subscribers. EMM generator is an external server from CAS supplier which produces EMM messages and repeatedly sends them to
the headend.
EMM configuration is divided to two tables: EMM Generator List and EMM List.
EMM Generator List:
•
Name: Only used in web interface to easily identify separate EMMG servers
•
IP filter <optional>: By default different EMM generators are separated by Client ID and this cell can be left empty. But if IP
address is entered, only connections from this address are allowed.
•
CAS: CA-System from the CAS List.
•
Client ID <optional>: The value EMMG uses to identify itself (info from CAS supplier). Often 'Super_CAS_id' is used as
'client_id', so can be left empty and device automatically uses 'Super_CAS_id' of the selected CAS.
EMM List:
•
EMM Generator: Name from EMM Generator List
•
Data ID <optional>: EMMG identifies separate streams by Data ID. If left empty, all Data Ids will be accepted.
•
Bandwidth: Allocated bandwidth (kbps) for this EMM stream. It is responsibility of the EMMG to actually maintain the
bitrate.
•
Private Data <optional>: Arbitrary binary data included as 'private_data' in the CA_descriptor for this EMM.
•
Status: EMM receiving status shown as traffic lights.
Page 56 of 68 BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31