Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02
4.4.3.
Upload initialization data
In the section UPLOAD SYSTEM INITILIZATION DATA FROM FILE you can upload the initiaization data from a file to the modul.
After an update, initialization data saved with older software versions can be loaded into the device with a newer Software
version.
Initialization data saved with a newer software versions can not be loaded into devices with an older Software version.
Choose a configuration file.
Click on UPLOAD.
The upload will take a few seconds.
4.5.
Reboot
4.5.1.
Rebooting
Under REBOOT THE SYSTEM the device can be rebooted.
Click on REBOOT.
After rebooting, the password must be entered again.
Page 48 of 68
BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31