Connecting To A Cas Server (With Mks 1-02); Connecting Via Cas Port; Connecting Via Control Port - axing MIE 8-00 Betriebsanleitung

2.8.

Connecting to a CAS server (with MKS 1-02)

The headend can be connected to a CAS server. The connection can be established via the CAS interface (CAS), the configuration
interface (Control) or the IPTV input (IPTV), see 3.11.1 on page 53.
If the headend station is connected to the CAS server and configured correctly, it can encrypt programs. The encrypted
programmes can be decrypted by connected users with the appropriate CA module/smart card.
Requirements:
•
Access to an appropriately configured CAS server must be available.
It is not part of the headend, nor is it described in this document.
•
A valid license must be installed for the device (see 3.8 on page 51).
•
The headend must be configured accordingly (see 3.11 on page 53).
2.8.1.

Connecting via CAS port

2.8.2.

Connecting via Control port

2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf | Page 15 of 68