Lcn (Logical Channel Numbering); Changing Program Name - axing MIE 8-00 Betriebsanleitung

3.4.2.

LCN (Logical Channel Numbering)

The LCN function enables channel allocation for the station scan of the TV devices.
•
The TV device must support the LCN function.
•
Different LCN standards can be set with the Region selection field. The selected LCN standard must match the connected
devices for LCN to work.
•
An LCN can only be entered for programs assigned to a modulator.
 Click on the LCN column for the corresponding program.
 Enter the LCN with the keyboard or increase / decrease the LCN with the arrow buttons right of the number.
 Enter a own LCN for each desired program.
 To erease the LCN, enter 0 in the LCN column.
 Click SAVE CHANGES.
The LCNs of the channels are saved.
3.4.3.

Changing Program Name

The name of a program can be changed. The entered program name will later appear in the channel list of the connected TV sets.
 Click on one of the programs.
The table with the Information opens.
 Click right of the field Program Name.
 Enter an individual program name and click on the green check mark.
This first completes the entry.
 After you have changed the desired program name(s), click SAVE CHANGES.
The entered program name(s) are stored in the headend.
2022-05-31 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE.pdf | Page 25 of 68