Maintenance And Care; Tips And Tricks; Pin Assignment Of The 13-Pin Connector; Opening The 13-Pin Connector - Eufab CROW 1 Bedienungsanleitung

(Fig. 24) so that the U-shaped bracket is released from the lock (Fig. 25).
Now you can fold the U-shaped bracket down onto the rack table (Fig. 26).
Figure 24: Loosening the quick-release lever
Fig. 25: Unlocking and folding down the U-bracket
Figure 26: U-bracket folded down

6. MAINTENANCE AND CARE

• After use, store the bicycle rack in a clean and dry place. Wash any mud or
other dirt off using water.
• Keep the trailer tow bar clean and free of grease.
• Keep the raack coupling clean and free of grease.
• Check the bicycle rack regularly for damages. Damaged or worn parts
must be replaced immediately. Only original replacement parts may be
used.
• Check the bolts and nuts of the bicycle rack regularly and tighten when
necessary.
• Immediately treat any damage to paintwork with paint.
• Regularly lubricate rotating and moving parts.
12

7. TIPS AND TRICKS

7.1 PIN ASSIGNMENT OF THE 13-PIN CONNECTOR

Left indicator
Rear fog light
Ground for contact 1 - 8
Right indicator
Right-hand tail light
(incl. marker light)
Brake light
Left-hand tail light
(incl. marker light)
Reversing light
Steady current (steady plus)
Charging cable
Charging cable -/ ground
(for battery in trailer)
Control cable for trailer identifi cation
(connection)
against ground pin 3 in trailer
Ground for contact (power supply)
Plug
58L
L
54
54G
R
58R
31
31

7.2 OPENING THE 13-PIN CONNECTOR

Unscrew the union nut of the plug. Use a small screwdriver to prise apart the
housing behind the plate for the socket fl ap.

7.3. CHANGING THE BULBS

Required tools: Screwdriver of PH1 size. Unscrew the cross-head screws of the
lens and remove the lens. Press the bulb to be replaced lightly into the socket
and then turn it a quarter of a turn. Now remove the bulb from the socket.
Insert the new bulb in the appropriate position.
List of bulbs:
Brake light/ Rear light: 12 V 21/5 W BAY15d
Indicator: 12 V 21W
Rear fog light: 12 V 21W
Reverse light: 12 V 21W
Licence plate illumination: 12 V 5W
Pin 1, L yellow
Pin 2, 54G blue
Pin 3, 31 white
Pin 4, R green
Pin 5, 58R brown
Pin 6, 54 red
Pin 7, 58L black
Pin 8 grey
Pin 9 not used brown/blue
Pin 10 not used brown/red
Pin 11 not used
Pin 12
Pin 13 not used white/black
Socket
58L
L
54
54G
R
58R
31
31
BAU15S orange
BA15S
BA15S
SV8,5 10 x 36 (Soffi t)